Remanufactured GE-Emerson IC693UDR010 28-Point Micro PLC

16 DC inputs, 1 DC output, 11 relay outputs; 24VDC power supply.

Remanufactured

Call for pricing
Availability
  • 9 in stock
  • Additional 2 ready to ship within 2-3 days

Repair

Call for pricing
Availability
  • Usually ships in 3-5 business days
Part Number
  • IC693UDR010RMN
Manufactured
Product Manual

Features

  • 1.0ms/K of logic (Boolean contacts) typical scan rate
  • Real time clock accuracy:
    • 50°F : 4.54 sec/day
    • 77°F : 5.22 sec/day
    • 131°F : 10.66 sec/day
  • Max. 8 slave devices per network (can be increased with a repeater)
  • 200mA max. for +24VDC output power supply (for input circuits and user devices)
  • +5VDC on pin 5 of serial ports:
    • Serial port 1: 155mA max.
    • Serial port 2: 100mA max.
    • Serial port 1 & 2 combined: 255mA max. (the load on either port can exceed the individual ratings listed above, if the combined load does not exceed 255mA)

The GE-Emerson IC693UDR010 28-Point Micro PLC contains a CPU circuit board, an I/O board, and a power supply board. 

The CPU contains and executes the user program and communicates with the programmer (HHP or computer running Logicmaster 90-30/90-20/Micro software). 

The module includes a high speed counter (HSC) function that consists of four built-in counters. Each counter provides direct processing of rapid pulse signals up to 5Khz for industrial control applications such as: meter proving, turbine flowmeter, velocity measurement, material handling, motion control, and process control. Because it uses direct processing, the HSC can sense inputs, count, and respond with outputs without needing to communicate with the CPU.

The I/O board provides the interface to the front panel input, output, and power supply connections for the Micro PLC. The DC input circuits condition and filter 24VDC input voltages so that they can be properly detected by the CPU module. The input points can be used in either positive or negative logic mode. The DC inputs can be used as regular inputs or to supply count and preload/strobe inputs for HSCs.

The power supply converts the AC or DC input source power to voltages required for internal circuitry.