Remanufactured GE-Emerson IC660BBD101 Genius Low-Leakage I/O Block

Provides eight identical 115VAC I/O circuits, each usable as either an input or output.

Remanufactured

$1,075.00
Availability
  • 2 in stock
  • Additional 6 ready to ship within 2-3 days

Repair

$860.00
Availability
  • Usually ships in 3-5 business days

For on-site repair and support, call us at 1-704-448-2212 or email sales@qualitrol.com.

Part Number
  • IC660BBD101RMN
Manufactured
Product Specs

Features

  • Unit OK, I/O Enabled LEDs (I/O Block)
  • LEDs (each circuit): On logic side of the switch
  • 1,500V block to block isolation
  • Heat dissipation:
    • 16W max. with 8 inputs
    • 43.5W max. with 8 inputs on at 2 Amps
  • 8.5W standby power (all inputs and outputs off)
  • 93 to 132VAC operating voltage (single source)
  • 47 to 63Hz frequency
  • 1 cycle power supply dropout time (16.7ms at 60Hz, 20ms at 50Hz)
  • Selectable input Filter Time from 10 to 100ms
  • Output feedback for monitoring
  • Output powerup defaults
  • Outputs hold last state or default
  • Pulse testing for outputs
  • Bus Switching Module control

The GE-Emerson IC660BBD101 Genius Low-Leakage I/O Block interfaces discrete sensors and actuators to a communications bus. Control power for the block is tapped off the input/output device voltages wired to the terminals. No separate block power supply is needed.

Each circuit has electronic fusing that shuts down the circuit in 5ms if output current exceeds 30 Amps with the output turned on, or 20 Amps after 2 cycles. The circuit is easily restored by command from a Hand-held Monitor or the CPU.

Block diagnostics include:

  • Overtemperature
  • Failed Switch
  • Open Wire for tristate inputs
  • Overload Detection and Shutdown
  • No-load Detection

Fault reporting can be enabled or disabled circuit by circuit.