Remanufactured GE-Emerson IC695PNC001 PACSystems Rx3i PROFINET Controller Module

Connects a PACSystems Rx3i controller to a high-speed PROFINET LAN.

Remanufactured

$978.00
Availability
  • 1 in stock
  • Additional 5 ready to ship within 2-3 days

Repair

$684.60
Availability
  • Usually ships in 3-5 business days

For on-site repair and support, call us at 1-704-448-2212 or email sales@qualitrol.com.

Part Number
  • IC695PNC001RMN
Manufactured
Product Specs

Features

  • Full programming and configuration services for:
    • PROFINET controller
    • VersaMax PROFINET Scanner
    • Third-party I/O Devices using Proficy Machine Edition
  • Features firmware upgrades using the WinLoader software utility
  • Supports star, ring, and daisy-chain/line network topologies
  • Internal clock synchronized with the Rx3i CPU for time-stamped diagnostics entries
  • Restart pushbutton to manually restart the PNC without power cycling the system
  • LEDs: OK, LAN, STATUS, CONFIG, ACTIVE, USB, and four Port LEDs
  • Compliant with EU RoHS Directive using the following exemptions identified in the Annex: 7c-I and 7c-III

The GE-Emerson IC695PNC001 PACSystems Rx3i PROFINET Controller Module enables the Rx3i controller to communicate with I/O devices on the LAN. The PNC provides all the functions, services, and protocols required for certification as a PROFINET I/O Version 2.2 I/O Controller, running at both 100 Mbps and 1 Gbps.

The PNC supports 10/100/1000 Mbps Copper, 100/1000 Mbps Multi-mode Fiber, and 100/1000 Mbps Single-mode Fiber. The LAN can include media interfaces of more than one type. PROFINET communications on the LAN require 100 and 1000 Mbps link speed. 10 Mbps cannot be used for PROFINET communications. However, 10 Mbps can be used for other types of Ethernet traffic such as ping and telnet.

The PNC features a built-in Command Line Interface function that provides direct monitoring and partial configuration via the micro USB port or using telnet. (NOTE: The USB port is for system setup and diagnostics only. It is not intended for permanent connection). 

Four switched Ethernet ports are featured on the PNC - two 8-conductor RJ-45 shielded twisted pair 10/100/1000 Mbps copper interfaces and two Small Form-factor Pluggable (SFP) cages for user-supplied SFP devices.