Repair GE-Emerson IC695CMM004 PACSystems Rx3i Serial Communications Module

Expands the serial communications capabilities of the Rx3i system.

Repair

$1,048.60
Availability
  • Usually ships in 3-5 business days

Remanufactured

$1,498.00
Availability
  • 5 in stock
  • Additional 1 ready to ship within 2-3 days

For on-site repair and support, call us at 1-704-448-2212 or email sales@qualitrol.com.

Part Number
  • IC695CMM004REP
Manufactured
Product Specs

Features

  • Port-to-port isolation and port-to-backplane isolation
  • RS-232, RS-485/422 communication, software-selected
  • 1,200 to 115.2k selectable baud rates
  • Module fault status reporting (Watchdog, RAM Fail, Flash Fail)
  • Module identity and status reporting, including LED status indicators
  • Meets CE, UL/CUL 508 and 1604, and ATEX requirements
  • Flash memory for future upgrades

The GE-Emerson IC695CMM004 PACSystems Rx3i Serial Communications Module provides four independent, isolated serial ports. Up to six Serial Communications modules can be located in the main PACSystems Rx3i backplane.

Each port can be configured for MODBUS Master, MODBUS Slave, CCM Slave, DNP3 Master, DNP3 Slave, or Serial I/O protocol. If any port is configured for DNP3 Master or Slave, the other ports on the module can only be configured for DNP3 Master or Slave.

For modules with firmware version 1.32 or later, half-duplex flow control can be configured using Machine Edition Release 5.90, SP1, SIM 6, or later. Otherwise, flow control defaults to full-duplex.

These modules must be located in an Rx3i Universal Backplane.