Repair GE-Emerson IC220MDL721 VersaPoint Positive Logic Output Module
2 discrete outputs; 24VDC nominal output voltage.
Overview
Features
- 1V or less differential voltage
- 2A nominal current per channel
- +10% tolerance of the nominal current
- 4A total current
- Nominal load:
- Ohmic: 12Ω/48W
- Lamp: 48W
- Inductive: 48VA, (1.2H, 50Ω)
- Signal delay: OFF to ON:
- Ohmic nominal load: 200μs, typical
- Lamp nominal load: 200ms, typical (with switching frequencies up to 8Hz, above which the lamp load responds as an ohmic load)
- Inductive nominal load: approx. 250ms (1.2H, 12Ω)
- Signal delay: ON to OFF:
- Ohmic nominal load: approx. 200μs
- Lamp nominal load: approx. 200μs
- Inductive nominal load: approx. 250ms (1.2H, 12Ω)
- Auto restart overload response
Description
The GE-Emerson IC220MDL721 VersaPoint Positive Logic Output Module is used to output 24VDC digital signals. The module requires one terminal strip, sold separately. It includes connections for two 24V digital actuators, and allows for connection of 2-, 3-, and 4-wire actuators. The outputs include short-circuit and overload protection, and the module includes diagnostic and status indicators. To provide electrical isolation between the logic level and the I/O area it is necessary to supply the bus terminal and the digital output module using the bus module or a power terminal from separate power supply units. Interconnection of the 24V power supplies is not allowed.
Documents
Need Help? Call an expert at 1-704-702-6380
We're open Mo-Fr 8:00am to 5:00pm
