Remanufactured GE-Emerson IC220MDL752 VersaPoint Positive Logic Output Module

4 discrete outputs; 24VDC nominal output voltage.

Remanufactured

$138.00
Availability
  • 3 in stock

Repair

$96.60
Availability
  • Usually ships in 3-5 business days
Part Number
  • IC220MDL752RMN
Manufactured
Product Specs

Features

  • 1V or less differential voltage
  • 0.5A nominal current per channel
  • +10% tolerance of the nominal current
  • 2A total current
  • Nominal load:
    • Ohmic: 48Ω/12W
    • Lamp: 12W
    • Inductive: 12VA (1.2H, 50Ω)
  • Signal delay upon: OFF to ON:
    • Ohmic nominal load: 100μs typical
    • Lamp nominal load: 100ms typical (with switching frequencies up to 8Hz; above this frequency the lamp load responds like an ohmic load)
    • Inductive nominal load: 100ms typical (1.2H, 50Ω)
  • Signal delay upon: ON to OFF:
    • Ohmic nominal load: 1ms typical
    • Lamp nominal load: 1ms typical
    • Inductive nominal load: 50ms typical (1.2H, 50Ω)

The GE-Emerson IC220MDL752 VersaPoint Positive Logic Output Module is used to output 24VDC digital signals. The module requires one I/O terminal strip, sold separately. It includes connections for four digital actuators, and supports the connection of 2- and 3-wire actuators. The outputs are short-circuit and overload protected, and diagnostic and status indicators are included. To  provide electrical isolation between the logic level and the I/O area it is necessary to supply the bus module and the digital output module using the bus module or a power terminal from separate power supply units. Interconnection of the 24V power supplies is not allowed. All four channels are thermally coupled, i.e. an error in one channel can affect the other channels.