Repair GE-Emerson IC670MDL330 Field Control Discrete Output Module

Provides a single group of 16 discrete outputs.

Repair

$720.00
Availability
  • Usually ships in 3-5 business days

New Surplus

$1,900.00
Availability
  • Out of Stock

Remanufactured

$900.00
Availability
  • Out of Stock
Part Number
  • IC670MDL330REP
Manufactured
Product Specs

Features

  • 12 to 120VAC rated voltage
  • 10 to 132VAC (47 to 63Hz) output voltage range
  • Output current:
    • 1 Amp max. per point
    • 4 Amps max. per module
  • Isolation:
    • User input to logic, user input to frame ground: 250VAC continuous, 1500VAC for 1min
    • Point to point: no isolation between individual points in a group
  • 275mA current drawn from BIU (with all points on)
  • 10A max. inrush current for one cycle (20mS)
  • 1.0A max. load current (resistive) from 10 to 132VAC
  • 10mA min. load current per point from 10 to 132VAC
  • 2.0V max. output voltage drop
  • Less than 2A max. output leakage current at 120VAC
  • Less than 1/2 cycle on/off response time

The GE-Emerson IC670MDL330 Field Control Discrete Output Module uses power from the supply in the bus interface unit (BIU). An external source of AC power must be provided to power the loads. Individual LEDs (logic side), visible through the transparent portion of the module top, indicate the on/off status of each output.

Intelligent processing for this module is performed by the BIU or elsewhere in the system. This includes configuring features such as output default and fault reporting. The module has 16 bits (two bytes) of discrete output data. A BIU is required to obtain this output data from the host and/or local processor.