Remanufactured GE-Emerson IC600PM507 Series Six Redundant Processor Unit

Can be utilized along with an Auxiliary Power Supply Module.

Remanufactured

Call for pricing
Availability
  • 3 in stock

Repair

Call for pricing
Availability
  • Usually ships in 3-5 business days
Part Number
  • IC600PM507RMN
Manufactured
Product Manual Product Specs

Features

  • Input:
    • AC: 95 to 260VAC, 25VA max, 47 to 63Hz frequency
    • DC: 25VDC, V maximum, 47 to 63Hz frequency
  • Output:
    • +5VDC at 15.5 Amps max.
    • +12VDC at 1.0 Amps max.
  • 33ms minimum allowable power interruption @ 115VAC line
  • Noise immunity meets requirements of NEMA ICS 2-230 and ANSI C37.90A
  • Provides access to electromechanical relay contacts
  • Visible LED monitor

The GE-Emerson IC600PM507 Series Six Redundant Processor Unit enhances a Series Six Plus system by acting as a switch to transfer control from one Series Six CPU to a standby CPU if a failure of the first CPU occurs.

To accomplish this, the RPU monitors the Master CPU and I/O chain for fault conditions, and when such conditions are detected, conducts an orderly transfer of control to the standby CPU. A bumpless transfer (without loss or interjection of data) can be accomplished within milliseconds, while maintaining program and I/O continuity. Actual transfer time varies up to two CPU sweeps, depending where in the sweep cycle the fault occurs, and the amount of data to be transferred. 

The RPU module must be connected to two Series Six CPUs and a Series Six I/O system to complete the system configuration.